All Products

Level 1 Procedural Mask (50/Box)

The Canadian Shield’s Level 1 procedural masks are the standard for low-barrier fluid exposure. These triple-layer masks feature a moisture absorbent inner layer and a moisture repellent outer layer with pleated polypropylene for full coverage of the nose and mouth. Added nose stiffeners ensure a tight seal to minimize gaps. 

Masks are 100% polypropylene. Latex and fiberglass free. Nose bridge is made of galvanized iron sealed in plastic.

Earloops are 70% Polyester, 30% Spandex.

Features

• Made-in-Canada: All of our PPE Procedural Masks are 100% designed and manufactured in Ontario, Canada
  
• Full Coverage: Our pleated design offers full coverage of the nose and mouth. Added nose stiffener offers a tight seal to minimize gaps.
• These masks meet ASTM Level 1 requirements and are ASTM F2100-11 rated
  
  

Not sure what mask is right for you?

Level 2 Procedural Mask (50/Box)

The Canadian Shield’s Level 2 procedural masks are the standard for low-barrier fluid exposure. These triple-layer masks feature a moisture absorbent inner layer and a moisture repellent outer layer with pleated polypropylene for full coverage of the nose and mouth. Added nose stiffeners ensure a tight seal to minimize gaps. 

Masks are 100% polypropylene. Latex and fiberglass free. Nose bridge is made of galvanized iron sealed in plastic.

Earloops are 70% Polyester, 30% Spandex.

Features

• Made-in-Canada: All of our PPE Procedural Masks are 100% designed and manufactured in Ontario, Canada
  
• Full Coverage: Our pleated design offers full coverage of the nose and mouth. Added nose stiffener offers a tight seal to minimize gaps.
  
• These masks meet ASTM Level 2 requirements and are ASTM F2100-11 rated
  
  

Level 3 Procedural Mask (40/Box)

The Canadian Shield’s Level 3 procedural masks offer maximum barrier protection for environments with heavy risk of aerosol, spray or fluid exposure. These four layer masks feature a moisture absorbent inner layer and a moisture repellent outer layer with pleated polypropylene for full coverage of the nose and mouth. Added nose stiffeners ensure a tight seal to minimize gaps. 

Masks are 100% polypropylene. Latex and fiberglass free. Nose bridge is made of galvanized iron sealed in plastic.

Earloops are 70% Polyester, 30% Spandex.

Features

• Made-in-Canada: All of our PPE Procedural Masks are 100% designed and manufactured in Ontario, Canada
  
• Full Coverage: Our pleated design offers full coverage of the nose and mouth. Added nose stiffener offers a tight seal to minimize gaps.
  
• These masks meet ASTM Level 3 requirements and are ASTM F2100-11 rated
  

Unrated 3-Ply Procedural Mask (50 Pack)

Our high-quality, triple-layer Procedural Masks are designed with protection and breathability in mind. Each mask features a moisture absorbent inner layer, a moisture repellent outer layer, and pleated polypropylene for full coverage of the nose and mouth. Added nose stiffeners ensure an adjustable form-fit for safe wearability and comfort.

Masks are made of 100% polypropylene - and they're latex and fiberglass free. Earloops are 70% Polyester, 30% Spandex.

Our 3-Ply Procedural Masks are non rated and are not recommended for use in any environment where significant exposure to liquid, bodily, or other hazardous fluids may be expected.

Sold in quantities of 50.

Features & Benefits

• Made-in-Canada: All of our PPE Procedural Masks are 100% designed and manufactured in Ontario, Canada
  
• Full Coverage: Our pleated design offers full coverage of the nose and mouth. Added nose stiffener offers a tight seal to minimize gaps.

Mix & Match: Minimum Order of 2 Masks ($14.95 per mask)

The Canadian Shield's Kids Cloth Face Mask is a breathable, washable, triple-layer face mask with superior filtration technology.

Superior Filtration Technology, Triple-Layer Protection.

With two layers of 100% cotton, and an inner layer of non-woven polypropylene composite by Synergex One for added filtration, Cloth Masks by The Canadian Shield are reliable, comfortable, and safe. 

Each 3-layer cloth mask includes a fully-adjustable elastic head strap which eliminates strain around the ears, providing comfortable all-day wear. The unique cord-stopper design and nose bridge stiffener ensures a snug and customizable fit around the mouth, chin and nose. All cloth masks are 100% designed and hand-sewn in Ontario, Canada.

These masks are not intended to be used for medical purposes.

Reusable Cloth Mask Features & Benefits

• Superior Filtration: Triple-layer protection 
• Interior and Exterior Layers: 100% Cotton, 170GSM +/-5%. For more information on GSM and thread count, click here.
• Mid-Filter Layer: Synergex One multi-layer non-woven polypropylene composite.
• BFE (Bacterial Filtration Efficiency): >85%
• All-Day Comfort: Fully-adjustable head strap design eliminates strain on ears.
• Maximum Protection: Elastic head strap design and nose bridge stiffener ensures a snug and comfortable fit around the nose, mouth and chin.
• Touchless Removal: Elastic head strap design allows for easy, touchless removal of mask from the face.
• Made in Canada: 100% designed and hand-sewn in Ontario, Canada.

To find the right fit for you, reference our sizing chart below or click here.

Caring For Your Mask

• Wash your mask before first use and after each wear.
• Hand or machine-wash with COLD WATER ONLY (100% cotton masks will shrink with warm/hot water).
• Tumble dry on low or hang mask to dry.
• Ensure the mask is completely dry before storing and store in a clean bag or container between uses.
• Do not touch the mask while wearing it.
• Remove the mask from your face using the head straps without touching the front.
• Wash your hands for at least 30 seconds with warm water and soap after removing the mask.

Reusable Kids Face Shield (5-Pack) - Ages 5-12

The Canadian Shield protects Canadians of all ages - including our youngest generation. Modelled after our original Reusable Face Shield, each Kids Face Shield is fully reusable and features an adjustable strap to ensure a safe, comfortable fit. It's also designed to be worn comfortably over glasses.

When properly sanitized, our Kids Face Shield can be worn 15+ times, and can be recycled after use. This shield is suitable for kids ages 5-12 years old. 

Shields are 100% latex-free.

Features & Benefits

∙ Reusable & Recyclable: Our reusable Kids Face Shield can be worn 15+ times when properly cleaned and sanitized. The entire shield, including the red rubber band, can be sanitized for reuse. Please refer to included instructions and follow Public Health guidelines for sanitization and reuse.

∙ Affordable: Compared to other disposable shields with limited usage periods, our Kids Face Shield is an affordable, safe option that's made in Canada.
∙ Full Coverage: This face shield provides optimum protection for your little one, offering coverage from ear-to-ear and hairline-to-neck.
∙ Adjustable: Each shield features an adjustable red rubber head strap that ensures a snug and secure fit on all head sizes. 
∙ Sustainable Production: The Canadian Shield is 100% designed and manufactured in Waterloo, Ontario. We’re on a mission to bring manufacturing back to Canada - that’s why we’ve created a sustainable network of North American suppliers.

Details: 
- All purchases of our reusable Kids Face Shield are FINAL SALE. For defects, warranties, and replacements, please contact our sales team. 
- Each face shield comes disassembled and must be assembled prior to use. 
- We recommend that each shield is properly sanitized and disinfected prior to each use.
- Disclaimer: Kids' face shields should always be worn under adult supervision. Kids' face shields are not recommended for children under 5 years of age.

Reusable Kids Face Shield (20-Pack) - Ages 5-12

The Canadian Shield protects Canadians of all ages - including our youngest generation. Modelled after our original Reusable Face Shield, each Kids Face Shield is fully reusable and features an adjustable strap to ensure a safe, comfortable fit. It's also designed to be worn comfortably over glasses.

When properly sanitized, our Kids Face Shield can be worn 15+ times, and can be recycled after use. This shield is suitable for kids ages 5-12 years old. 

Shields are 100% latex-free.

Features & Benefits

∙ Reusable & Recyclable: Our reusable Kids Face Shield can be worn 15+ times when properly cleaned and sanitized. The entire shield, including the red rubber band, can be sanitized for reuse. Please refer to included instructions and follow Public Health guidelines for sanitization and reuse.

∙ Affordable: Compared to other disposable shields with limited usage periods, our Kids Face Shield is an affordable, safe option that's made in Canada.
∙ Full Coverage: This face shield provides optimum protection for your little one, offering coverage from ear-to-ear and hairline-to-neck.
∙ Adjustable: Each shield features an adjustable red rubber head strap that ensures a snug and secure fit on all head sizes. 
∙ Sustainable Production: The Canadian Shield is 100% designed and manufactured in Waterloo, Ontario. We’re on a mission to bring manufacturing back to Canada - that’s why we’ve created a sustainable network of North American suppliers.

Details: 
- All purchases of our reusable Kids Face Shield are FINAL SALE. For defects, warranties, and replacements, please contact our sales team. 
- Each face shield comes disassembled and must be assembled prior to use. 
- We recommend that each shield is properly sanitized and disinfected prior to each use.
- Disclaimer: Kids' face shields should always be worn under adult supervision. Kids' face shields are not recommended for children under 5 years of age.

Level 1 Procedural Mask (50/Box)

The Canadian Shield’s Level 1 procedural masks are the standard for low-barrier fluid exposure. These triple-layer masks feature a moisture absorbent inner layer and a moisture repellent outer layer with pleated polypropylene for full coverage of the nose and mouth. Added nose stiffeners ensure a tight seal to minimize gaps. 

Masks are 100% polypropylene. Latex and fiberglass free.

Earloops are 70% Polyester, 30% Spandex.

Features

• Made-in-Canada: All of our PPE Procedural Masks are 100% designed and manufactured in Ontario, Canada
  
• Full Coverage: Our pleated design offers full coverage of the nose and mouth. Added nose stiffener offers a tight seal to minimize gaps.
• These masks meet ASTM Level 1 requirements and are ASTM F2100-11 rated
  
  

Not sure what mask is right for you?